| Porsche 911 & Carrera Oil Circulation - Page 9 |
Center-Mount 911 Oil Cooler Kit  |
| Add a center-mounted oil cooler to 1965-89 911 for maximum cooling. This is a great solution for race cars and 3.6 liter conversions. For connection to existing brass oil lines in the front fender, either factory or finned oil lines. If your car has no external cooler now, you will need to purchase necessary lines and hoses. Fittings are high-flow factory-type 30mm throughout, no restrictive AN fittings or adapters are used. Don't settle for inferior solutions! Note: A suitable front bumper/valance is required, not included. STD-172 coolers require 26 inches of width in the front valance. Installer will need to fabricate mounting brackets based on valance and space requirements. For mounting in series with a fender-mount cooler you must substitute 1 90 degree hose end for 1 straight hose end. Call for details. Hose is cut-to-length based on final oil cooler mounting position and hose-ends crimped on. RS air duct is a highly recommended addition to this kit. |
|
| Setrab STD172 Front Oil Cooler Kit |
| Kit includes: • (1) Setrab STD-172 oil cooler, 8-1/4 x 6-1/4 x 22-1/2
• (2) Widemouth 30mm male fittings for cooler
• (2) 22mm crush washers
• (3) 30mm straight hose ends
• (1) 30mm 90deg hose end
• (8) Feet 7/8 inch hose
• (2) 1-inch hose clamps |
|
| ERMP-2-STD172 | Setrab STD172 Front Oil Cooler Kit for 911 (172 cooler and hardware kit to factory hard lines) | $881.75 |  |
| Setrab STD272 Front Oil Cooler Kit |
| Kit includes: • (1) Setrab STD-272 oil cooler, 9-1/4 x 7-1/4 x 22-1/2
• (2) Widemouth 30mm male fittings for cooler
• (2) 22mm crush washers
• (2) 30mm straight hose ends
• (2) 30mm 90deg hose ends
• (12) Feet 7/8 inch hose
• (3) 1-inch hose clamps |
|
| ERMP-2-STD272 | Setrab STD272 Front Oil Cooler Kit for 911 (272 cooler and hardware kit to factory hard lines) | $1061.00 | |
Oil Tanks and Senders |
| Replace your rusty oil tank with a brand new one. Tanks are copper-plated steel, and painted black. Or replace a faulty oil-level sender and get a reading on your oil level. The only tanks available currently are the late-style Carrera oil tanks. These are a drop-in replacement for the earlier tanks, however, you need to purchase the late-style oil cap (see below) with the new tank. |
|
| 911-107-006-22-OEM | 911 Oil Tank (1973-89)
Brand: Genuine Porsche | $928.25 | |
911-641-541-02-M100 | Oil Tank Level Sender with Gasket, 911 and 911 Turbo (1974-89)
Brand: Genuine Porsche [Photo] [Photo] |  |
| $68.75 | |
914-201-891-00-M82 | Oil Tank Level Sending Unit Gasket, 911 (1974-89)
Brand: VDO [Photo] [Photo] | |
| $5.50 | |
| 999-659-011-50-OEM | Protective Cap for Oil Tank Lever Sender Wire, 911/911 Turbo (1965-89) | $6.25 | |
Oil Tank Caps and Dipsticks |
| Lost your oil cap? Dipstick looking a little bent? Replace them with brand new ones and get your engine compartment looking real 'slick.' |
|
911-107-072-02-M127 | Oil Cap, Bayonet Style, 911/911 Turbo (1973-86)
Brand: German [Photo] [Photo] | |
| $11.00 | |
944-107-091-01-M260 | Oil Cap, Threaded Style, 911/911 Turbo (1984-89)
Brand: OEM [Photo] [Photo] | |
| $13.75 | |
901-201-272-00-M260 | Oil Cap Seal, Bayonet Style, 911/911 Turbo (1965-77)
Brand: OEM [Photo] [Photo] | |
| $4.00 | |
930-107-272-01-M100 | Oil Cap Seal, Bayonet Style, 911/911 Turbo (1978-86)
Brand: Genuine Porsche [Photo] [Photo] | |
| $2.25 | |
999-701-846-40-M17 | Oil Cap Seal, For Threaded Style Cap, 911/911 Turbo (1986-89), Each
Brand: Victor Reinz | |
| $2.75 | |
930-107-731-00-M100 | Dipstick, 911 (1974-80) w/original oil level sender
Brand: Genuine Porsche [Photo] [Photo] | |
| $15.25 | |
930-107-731-01-M100 | Dipstick, 911 (1974-80) w/late oil level sender, 911 (1981-89)
Brand: Genuine Porsche [Photo] [Photo] | |
| $21.50 | |
911-107-192-03-OEM | Oil Tank Filter Gasket, 911/911 Turbo (1974-89)
Brand: Genuine Porsche [Photo] [Photo] | $61.25 | |
Engine Oil Coolers |
| Is your 911 stock oil cooler leaking? Replace it with a brand new OEM one, while they are still available. Also, replace your oil cooler seals. |
|
911-107-041-00-M6 | | $1106.00 | |
| PEL-TMP-9801 | Engine Oil Cooler (Reproduction), 911 (1972-89), Each
Brand: TMP | Temporarily unavailable | |
999-704-172-50-M213 | Oil Cooler Seal, small, 2 per cooler, 911 (1974-89), each
Brand: D P H [Photo] [Photo] | |
| $3.00 | |
999-704-173-50-M213 | Oil Cooler Seal, large, 1 per cooler, 911 (1974-89)
Brand: D P H [Photo] [Photo] | |
| $3.50 | |
