| Porsche 911 & Carrera Cam Towers & Timing Chains - Page 6 |
Valve Covers |
| 911 Turbo Valve Covers |
| The original valve covers are infamous for leaking around the gasket seals. This is because the magnesium has a different coefficient of thermal expansion than the aluminum heads. The result is a gap that develops when hot, along with a leak. Fix the problem on both the lower and upper set by installing a set of aluminum turbo valve covers. On the 914-6, the lower ones need to be machined slightly in order to get them off of the heads when the engine is installed in the car. When installing, you also need new valve cover gaskets. Our gasket kit contains the complete set of new gaskets, washers and nuts for all four covers. |
|
901-105-115-03-M260 | 911 Turbo Valve Cover, Upper (1974-89), 2 required, sold per each
Brand: OEM [Photo] |  |
| $193.75 |  |
930-105-116-00-M260 | 911 Turbo Valve Cover, Lower (1974-89), 2 required, sold per each
Brand: OEM [Photo] [Photo] | |
| $78.00 | |
| PEL-9146-0015N | Valve Cover Set, 2 Upper and 2 Lower (1974-89) | $543.50 | |
| Hargett Precision Billet Aluminum Valve Covers |
Hargett Precision has a new solution to an old problem: leaking valve covers. The paper gasket material on the original valve covers is prone to leaking, whether the covers are warped or not. These ribbed, billet aluminum valve covers use the 964/993 rubber gaskets. The result: no more leaks! They not only look good, these covers are thick and strong -- and are designed to be the last set of lower covers you'll need to purchase. Be sure not to forget the gaskets!
Lower covers sets and upper cover sets are sold separately. Hardware not included. |
|
HG-VC911L | Billet Aluminum Valve Covers, Lower, fits all 911 (1968-1989), Set of two Lower, gaskets not included [Photo] [Photo] | $295.00 | |
HG-VC911U | Billet Aluminum Valve Covers, Upper, fits all 911 (1968-1989), Set of two Upper, gaskets not included [Photo] | $285.00 | |
964-105-135-01-M208 | 964/993 Valve Cover Gasket, Lower, 2 Per Car, 911 Carrera 2/4 (1989-94), Each
Brand: Gloeckler [Photo] | |
| $11.25 | |
964-105-173-01-M208 | 964 Valve Cover Gasket, Upper, 6 Per Car, 911 Carrera 2/4 (1989-94), 911 Turbo (1993-94), Each
Brand: Gloeckler [Photo] | |
| $7.00 | |
900-084-004-02-M58 | Valve Cover Nut, 8mm Nylock, All Early 911 (34 Per Car), Each
Brand: OEM [Photo] | |
| $0.25 | |
900-031-014-30-M131 | Washer, 8.4mm, All Early 911 (34 Per Car), Each
Brand: Fischer & Plath [Photo] | |
| $0.25 | |
Valve Cover Gasket Kits |
| These gaskets should be replaced every time that you adjust your valves. The gasket kits come complete with valve cover gaskets and enough nylock nuts and crush washers for all 4 valve covers. Buy an extra pair or two to have on hand for next time you adjust your valves! |
|
10-0906-091-M260 | Valve Cover Gasket Kit (includes Cover Nuts & Washers), 911/911 Turbo (1968-89)
Brand: OEM [Photo] | |
| $23.25 | |
10-0906-092-M260 | Valve Cover Gasket Kit with Silicone Bead on lower Gasket 911/911 Turbo (1968-89)
Brand: OEM [Photo] | |
| $35.50 | |
930-105-194-04-M17 | Upper Valve Cover Gasket, 911/911 Turbo (1974-89)
Brand: Victor Reinz [Photo] [Photo] | |
| $6.00 | |
| Lower Valve Cover Gasket, 911/911 Turbo (1974-89) |
930-105-195-07-M127 | Lower Valve Cover Gasket, 911/911 Turbo (1974-89)
Brand: German [Photo] | |
| $7.00 | |
930-105-195-07-M260 | Lower Valve Cover Gasket, 911/911 Turbo (1974-89)
Brand: OEM [Photo] [Photo] | |
| $6.75 | |
| Silicone Valve Cover Gaskets |
Silicone Valve Cover gaskets for your Porsche! They are a tad thicker than ones you replace every time you adjust your valves and can get rid of those troublesome leaks. These can be reused again and again; just rinse them off and put them back on.
We do recommend you replace the Nylock nuts each time you remove the valve covers, but that applies to any valve cover gasket. |
|
PEL-SIL-VLGK | Silicone Valve Cover Gasket set, 4 per set, hardware not included - 911 (1974-89), 911 Turbo (1976-89) [Photo] | $48.70 | |
900-084-004-02-M58 | Valve Cover 8mm Nylock Nut (34 Per Car), 911 (1965-89), 911 Turbo (1976-92), Each
Brand: OEM [Photo] | |
| $0.25 | |
900-031-014-30-M131 | Washer, 8.4mm (34 Per Car), 911 (1965-89), 911 Turbo (1976-92), Each
Brand: Fischer & Plath [Photo] | |
| $0.25 | |
900-123-118-30-M131 | Oil Drain Plug Seal (22 X 27mm) for Plug at Bottom of Engine Sump Plate or Oil Tank (sold per each, 2 required), 911 and 911 Turbo (1965-89)
Brand: Fischer & Plath [Photo] | |
| $0.50 | |
